Ten things to consider when there are basic principles that can be used to buy all the jewelry, but because the rings are more specific shopping tips to follow. When purchasing rings you need to buy jewelry store basis, for example, when you buy rings, you need a band able to buy for years.
Read below the 10 commands to assist in the selection, acquisition and take care of wedding rings you.
1. Choose your metal and Style
This the only piece of jewelry if you decide to buy and wear everything, so take the time you want to talk, and some. The majority of other jewelry to you, but your man wants to be, even the white metal watch, so what do you do? Rings are easy to find compromise and have a mixture of yellow and white gold, you get both. Just choose your metal; you should think about how you can specify that your rings. We want gemstones or diamonds.
2. The budget is clearly gold zones Keyth run about $ 125 to $ 200 per film, and those of precious metals like platinum, is closer to $ 400 or $ 600 per film. The Diamond Information Center reports the average cost of a band is $ 742. If you can not burn in the ring can cost between $ 1.8 per character, depending on the font you choose and the method you choose to burn.
3. Make Time
Don’t wait too long. You should start looking for alliances at least two months before the big day. Take your time and find your ring and to review all options. If you have space you want to give more time for reflection. It can be up to 30 days to have a little dig.
4. Think practices and Keep Your Lifestyle Mind
There In no sense to buy a nice ring, does not remove the feeling of not feeling well with the finger or you will, too. Please remember to wear this group each day. You should try to get a ring that fits in your life, without any interruption.
Try to avoid broadband chunky, if you have an active life instead of opting for a thin strip. When you work with your hands, you may want a simple design,tiffany jewel, but as a diamond engagement ring, consider the case of the dirt goes. When certain metals or metal combinations irritate the skin, spend the money to buy rings and platinum. This makes it hypoallergenic for the average person because of purity, is a good choice.
5. 20-year test in the selection ring, you are not afraid to get out of the box, but make sure you choose something that I love for many years.
6. Choose the correct Size
Note that most people do not take their wedding rings, even in summer, winter, sports, pregnancy and menstruation, which makes all the fingers swell and contract with heat, cold,Tiffany jewellery, water retention and weight gain – so be smart, you think the size for all conditions.
7. Know the quality can not be stressed enough – with all the rings, check the quality! Inside the ring, the tree should be recorded. It should be the manufacturer’s mark, the icon of the sponsor, the minerals contained in the processing and finally metals – gold, silver or platinum. Be sure to have these markings. If two or more metals used in construction of the ring was, there should be a label for each person.
8. Guidelines
You are cleaning to easily clean your wedding ring. To make a ring that no stones clean, simply wipe with a soft, lint-free cloth such as chamois. You can easily blur with a solution of soap and water with few drops of ammonia. Dip a brush into the solution, and then gently brush the ring.
Make sure the plug leakage is used; rinse the ring off, then with a soft, dry cloth. Clean with hot soapy water and rinse and dry stone ring with a soft brush and a rag
9. Protect Jewelry
You should use when wearing his fingers clutching valuables such as platinum! You can do something to prevent any damage to your ring. Do not wear your ring while working hard or sports, such as Nick and nothing, not wearing your ring, found in the use of chemicals such as chlorine such as cracks or discoloration.
Matt surfaces show scratches much more than rough surfaces and platinum, which help a lot softer than gold, scratches and nicks. Fortunately, this is your ring jewelry simple recovery to its original splendor of the new application for the modification of surface and / or stuffing.
10. Wear your ring Jewelry
Don’t be reduced because it is easier to lose than we imagine. When you buy your ring, do something for sure is that we need to remove them very often, if at all. Having a specific place where you still have your belt if you remove some reason, and keep them from their pockets and away from wells.
A cat is a circle at the end of aid down the drain. Remove your rings when you’re on the road is the most dangerous time to do so. In other words, if you travel, it is likely to be sold at a loss or forget your ring. The insurance industry says the best chance of damaging or losing your wedding rings during the first year that you.
Diamond tutorial? What you should know before buying a diamond? In the following pages you will learn about diamonds and what you should know if you buy a diamond in the near future. ; This little guide will cover each of the 4 C gives a good understanding of the person to show how they are linked with the actual physical beauty of the diamond, and show how each of these features, pricing and availability of diamonds influence. ; Why do people buy diamonds?; If you long for the perfect diamond, the stress of the experience is often beyond the original motivation and purpose for the purchase of a diamond. Diamonds are the ultimate representation of love from one person to another. A diamond is a lasting symbol of commitment and dedication. Here at Emma Parker Co, seen as a diamond Love … Incorporated … ! what are the 4 C? The 4 C are the four most common characteristics about diamonds that happens, everything starts with the letter C . ; Is:; Cut; Color? Clarity? Carat weight? The importance and impact of each will be discussed separately in the following sections. ; CUT; Anatomy of a diamond? Before cutting the understanding, it is important to understand the different parts of a diamond. This way you can understand how each part relates to the visual beauty of diamonds, diamonds with the naked eye. ; Diamonds are classified into three main sections. These sections called crown (upper diamond), belt (zone) for the diamond-packages) and the pavilion (the lower diamond. See Figure 1 below.; Figure 1; Green is the diamond crown. The white zone is the diamonds. Dark green is the flag of diamonds.? The crown and the pavilion consists of outer surfaces called facets. These elements act as mirrors, reflect light that strikes. The combination of these two aspects, which lead to the diamond reflected light (reflected light) or let in the light (light leakage). Every aspect and every facet of the team has a specific purpose and function affect the appearance of the diamond. See Figures 2-3; Figure 2; This is the crown jewel. ; White is the list of diamonds. Black is the STAR multifaceted diamond. Green is a multifaceted diamond ring. Dark green belt on aspects of the diamond. Figure 3?; ; This is the flag of the diamond. ; Dark green is the main pavilion features diamonds, also known as the lower half. ; The green area is lower aspects of the diamond. ; The white dot in the middle shows the culet. If the diamond is where you are. ; Polish & symmetry? Polish? Polish is the goal of all aspects of the diamond. When cutting a diamond is completed,tiffany jewellery, the cutter and then polished with diamond grinding wheel with very fine sandpaper diamond grains. This procedure is to remove the roughness of the outer surface of the diamond sides to clean and give the sparkle of diamond. ; Different companies offer different certification marks for Poles, some decorated with the concept, and some use the term ideal. In fact, both are the same. Most problems with light varnish caused a stone to be degraded by the high quality at a very good climate, it is completely invisible to the naked eye, completely invisible to strengthen powerful microscope, like a microscope. ; Symmetry; symmetry, as discussed here, the external symmetry of the diamond. Symmetry has been characterized as a versatile cut diamond, the shape of the facets and the symmetry of the ground outside the diamond, etc. Common reasons for not taking the symmetry of the highest quality diamonds are subjects such as table in the center, distorted faces, distorted samples, additional seats, etc. ; Once again, small differences in symmetry completely invisible to the human eye. The differences between stone, to which the symmetry and a very good symmetry is visible only under magnification of the microscope. ; Percentages? The shares of these diamonds is necessary for the visual beauty of diamonds. They will determine the path of light through the stone. It will also consider the amount of light the diamond in its entirety. There are many measures that affect the ratios. We’ll go over them one by one, from simple to more complex. ; Here are some of the graphics, the American Gemological Society (AGS) and Gemological Institute of America (GIA). See Figures 4.5 below. ; For chart? Figure 4?; Courtesy of the table AGS AGS; Figure 5; ; Courtesy of AGS For the purposes of this discussion, we will use the graphics AGS, a little more readable. ; Diameter,Tiffany Earrings; The diameter is just the distance between one edge of the diamond on the opposite side. ; Depth; The measurement depth is the distance between the table and the diamond culet of the diamond. (As shown in Figure 2-3 discussed above) will see the extent of depth in Figure 5, 62.8% graphics. This rate is the effective optical depth, measured in millimeters, divided by the average diameter of the diamond. ; The depth can have different effects on the diamond. A diamond is flat, that the cut appear larger, while the diamond is cut deep to take a look smaller. This is called dispersion factor. Spread is simply the diameter of the diamond. If two teams have the same weight, but significantly lower (higher) than the other, will keep more of their weight at the bottom of the diamond, and have a little more face-up appearance, which is less frequent. ; Table? The table shows the most important aspect in the aspect of the diamond tip, as in Figure 2. This measure is the width of the table view. The painting was shown in Figure 5 as far as 55.9%. This percentage is much TABLE effective, measured in millimeters, divided by the average diameter of the diamond. ; Zone; The extent of the area is so far the band is now around the diamond, as shown in Figure 1. This measure can be represented graphically different ways of measuring the average width of the smallest and the largest width measurement, or a class of words, as fine, medium, Dick. ; The measure includes two issues area in general. ; 1. Durability? If the area is too thin, can affect the strength of the stone, making it vulnerable to breakage or damage received during the recruitment process or pending. ; 2. Hidden weight? If the belt is too thick, may be an indication that the so-called HIDDEN weight or the weight will not work and the apparent size of the diamond. The disadvantage is that diamonds are priced according to weight, will pay for the weight you do not see. However, it is very low in most cases. ; Culet; The culet is the small dot at the bottom of the diamond. This is presented as a small white dot in Figure 3 Culet in all sizes … ranked from large to very small and perhaps even the spirit or NO. In Figure 5 we see that it is classified as Colette. This means that there is no flat surface to the bottom of the diamond, but the culet come to a point. If you are in Figure 4, which will examine the chart for the certificate, you will see that Colette zero, exactly the same as shown in detail. ; The culet is really just a visual impact on the stone. It may be a window effect by turning the stone if it is large enough. ; Diamond Culet round with a sudden? Figure 6; Diamond Culet round with a big? Figure 7; If you look at the images in Figures 6-7, can ensure that the culet diamonds. In Figure 7 you can clearly see a gap in diamond, where, how, is not visible to the diamond shown in Figure 6. Some forms of diamond was very good with a big culet, as old standards, etc. These are discussed further in the diamond-shaped sections of this guide. ; Crown Heights; Height of Crown refers to the height of the diamond above the girdle. Figure 5 shows the amount of the Crown for the Diamond only 15.3%. ; Pavilion depth; PAVILION DEPTH refer to the depth of the diamond under his belt. Figure 5 shows the FLAG DEPTH diamonds, 43.4%. ; Crown Angle; The angle of the Crown is the angle at which show the many aspects of the exposure (as in Figure 2) are oriented in relation to the table. For diamond, we can see that the diagram of Figure 5 shows a crown ANGLE 34.7 degrees. This measure, combined with the prospects FLAG does not say much about the diamond light back. These measures tell you how the diamond reflects the most light appears. ; Pavilion Angle; FLAG angle is the angle at which the main features PAVILION see (as in Figure 3) are oriented in relation to the table. For diamond, we can see that the diagram of Figure 5 shows a corner kiosks of 41.0 degrees. This measure, combined with the angle of the Crown, you can learn a lot about the diamond light back. These measures tell you how the diamond reflects the most light appears. ; Axis aspects? Measures diagram, certain measures concerning aspects of the smaller stone. These are examined in detail in our faces Axis tutorial. ; AGS Ideal Cut Grade: GIA Excellent Cut Grade? In the world of diamonds, there are now two large cut-grading system for round diamonds. Gemological American Society (AGS) and Gemological Institute of Conservation for Cut (USA) Cut Grade. The two laboratories have published their statistical ranking system after extensive research and scientific examination. Both varieties of cut does not overlap, but the approach of the principle of classification cut from opposite sides of the spectrum. ; VERY IMPORTANT: Vocabulary conflict can be one of the most frustrating trying to learn about diamonds. The certification of two leaders in the world, the AGS and the GIA, the language used is similar in a way that will confuse everyone who learns it is diamonds for the first time. See the following table to help the right words and to avoid confusion. ; Characteristic; AGS term? To run? Cut, polish, symmetry; Perfect Excellent Very Good Good Fair Poor? Excellent Very Good Good Fair Poor; Fluorescence; Negligible? No; Culet; Spitzer; No? Approach AGS; AGS is a scientific approach to cutting note. Cut-types associated with a number ranging from 0 to 10, with 0 being the best, or so-called IDEAL. AGS in addressing issues that are not visible to the human eye, and calls for the complete perfection of giving a diamond before giving the highest AGS Cut … Ideal Cut. ; The key to cutting tool AGS system is a little piece of technology, such as ASET (Angular Spectrum Evaluation Technology) is known, is shown below. ; Figure 8 – Courtesy of AGS;? This technology is very simple. Be a shining jewel has seats that reflect the light (light RETURN). Substantive issues that work well acts as a mirror so they can put something that can play in front , or as the case goes to the ….? The three colors of ASET simply tell us that the angle at which aspects reflect light. The Greens are all the light reflected from 0-angle of 45 degrees is RED all the reflection of light from an angle of 46 to 75 degrees, and blue light reflected everything from an angle far shown 76 to 90 shown. BACK TO BLACK is the absence of light, or what is called the leakage of light. Where is the white light through the diamond is not reflected in your eyes.? Note that the angle of reflected light, more brightness when viewed with the naked eye. Red and blue is what we want, with as little as possible, GREEN. Shown below are some examples of diamonds, with all the different interests, which differ in the asset. Note the sharp increase in green and white, like the diamond will be directly in the cup. ; Figure 9 – AGS Ideal Cut; Figure 10 – AGS Cut Grade 4/good; Figure 11 – AGS Cut Grade 7 / fair? Figure 12 – AGS Cut Grade 10/Poor; A unique feature of the AGS cut is the variety that the Polish and symmetry. To be awarded a diamond AGS ideal, the diamond must also have Polish and Ideal Symmetry Ideal. If any of these categories do not receive a perfect system, the variety of cut diamonds are ideal for downgrading Excellent – irrespective of the efficiency of light diamond. ; It is important to understand the difference between the ideal of the Polish and symmetry and symmetry is excellent and very small and completely invisible to the naked eye. ; The approach? To cut deals with the classification problem is very different from the GIA AGS. The variety is cut for a human eye, based on observation. Although the science of the problem under consideration, chosen for cut grading seen through the eyes of the consumer. ; FOR formed the basis of cut surface classification system for topographic 70,000 people from 20 different diamonds, and asked each person, the stones of the class beauty. Selected properties of diamonds carefully and answer respondents’ recorded and presented in tabular form. These real-world results formed the basis for the classification system for Cut. ; As for cut grade elected obsevation the human eye, the tolerance level of cutting based course is less severe than that of the AGS. It is important to remember that diamonds are beautiful to buy the eye of the user and those who can not see. It is from this point, the diamond will be under continuous monitoring of the human eye. Since then, this is the level of control that the Diamond will be taken for most of his life, made the basis of the degree to cut right to observe the eyes of common sense. ; Here are some examples of how excellent for stones could appear in reflector technology. These pictures represent the views of diamonds through the ideal-Field. The Ideal-Scope is a reflective one color that shows on the first day and light leaks. ; Figure 12 – Courtesy Ideal Scope?; Quite simply, a diamond is placed in a clear container with a small group in the perfect position on this issue. Each diamond reflects light, reflected light will be seen in two colors, red or black. Red is the mirror image of the rose-red and black plastic is a mirror image of the shadow and the viewer’s eye through a hole at the top of the hierarchy caused. The maximum angle of light is back in black, then this is the strongest, followed by a dark red and then bright red / pink. ; White, in the ideal-Scope is the result of leakage of light (light that leaves the bottom of the diamond) and is really bright white background for the session is finished diamond. Since the diamonds reflect light back into these areas, you can see through the stone and the white background behind them. Not all leaks of light visible to the naked eye, but it is important to choose to see something in the ideal Scope account any other information on diamonds. The decision should never be in a datasheet. ; Both diamonds are GIA Excellent cut. ; Figure 13; Figure 14; will notice that there are many more white in the middle of the diamond on the other hand, Figure 14, when the first photo is 13 because the second diamond leaks more light in the middle of the stone. The reason why the two top quality stone for may, as the GIA Cut Grade System based on naked eye observation, based on brightness. The two stones are beautiful and bright, though the first light diamond superior performance. ; As anyone can see with the naked eye is different, and yes, people can see the difference between these two stones with the naked eye. There are also people who are unable to differentiate between the stones. GIA study showed that the distinction between the observers, most respondents were not able, a significant difference between the two stones. Personal preferences will determine where are the preferences. ; In addition, the GIA cut varieties considered particularly factors that affect the beauty of diamonds with the naked eye. For example, according to the classification scheme, diamond cut finish, which allowed the Polish and symmetry are very good, while maintaining an excellent rating reduction. ; Color? Color notes? Types of color characterized by a classified letter grade. The series begins with color color D, which is white and G, which is darker. ; More diamond engagement rings, pendants and solitaire diamond buttons purchased on the D – K color range, while many small stones in a series of color jewelry below. ; Figure 15 – Courtesy of the GIA?; The color is organized as follows; D, E, F; Clear? G, H, I, J; Almost no color; K – Z? Color? Diamond color is graded with the diamond head. The reason is that since the color is the body of precious stones, it is important that the flash of diamonds from the corner where the diamonds are not examine the ability of observers to see the jewelry and keep the affected color. ; The background color is that each color is different. Color sensitivity is something that is unique for each person. This is a showcase journey to the center of Diamond Store you comes in handy. Before selecting a row of diamonds, head down to the mall and ask to see many colors of the diamonds ready for you. This will give you a great feel for how many colors you can see in a diamond. ; Bring a white card with you and put some diamonds in bulk varieties of different colors to see. Fold the white card in half and the rest diamonds, headlong on the map. Really, if you use it, should not subdistributed fluorescent light, but the lighting of the jewels should be sufficient for this exercise. By placing the diamond on her head and looked around the pavilion of the diamond, you should be able to see very small differences in the color of diamonds. Then turn the diamond of the site and see the color you can see can see the face. ; Cut affect the color? The diamond cut has a significant effect on the apparent color of the diamond. The color of a diamond is considered the jewel inside, so the color looks better from the bottom of the diamond. The reason why the cutting ability to positively influence the color of a diamond facial at the point where a diamond with a bright light RETURN (where diamonds reflect much light) reflected light interfere with the ability of viewers to To see the jewelry body. Since the color is the body of the ornament, and the viewer can see more light than the real jewel same performance, the color of the diamond is less visible when the diamond in place up. When a diamond is said to encounter know that the character mentioned. ; Fluorescence; Fluorescence is reduced a phenomenon that occurs in approximately 50% of all diamonds. It occurs when boron, an element in the formation of diamonds is present. The result is that the diamond is lighting or glow under black light. Although lighting is available in various colors, blue is the most common and least worrisome. Many consumers feel the need to stay away from fluorescent, but due to lack of sufficient data.? Fluorescence is in increments of None, Faint, moderate, severe and very very secret.; Figure 16; Figure 16 may be the result of fluorescence is seen on a stone with a black light. Since the show is only visible in black light that carriers should be a place where black lights are used as a nightclub, or have already visited the diamond certificate in a way. ; Fluorescence can have two important implications for a diamond. ; 1. It can help to paint the face of a diamond. Lower color diamond, as I or J color, the presence of fluorescent leading diamond white person to appear as a diamond of the same color, not fluorescent. ; 2. The fluorescence can cause the diamond to the fact that the greasy, milky or cloudy in strong direct sunlight, sunlight or headlights. However, this does not happen all the time. It’s really only one problem with diamonds, fluorescence strong or very strong, and this is not for everyone. A simple way to avoid one being the seller, requiring the diamond to take the diamond to a strong light source and verify that for you. The seller must have an honest opinion on a visible fluorescence, which is why you see the sun, and dishonest about it will ensure that a dissatisfied customer, also a diamond dealer. ; In general, the fluorescence is no reason not to buy a diamond. It is important to know the effects of lighting on the stone. Some of the most beautiful diamond in the world have a strong fluorescence. ; Clarity? Clarity Grade? Classification clarity is awesome, but really very simple. The stones are divided into the following categories; Flawless (FL); Internally Flawless (IF); Very, very low VVS1 which 1 (); very, very low Included 2 (VVS2); 1 Very slightly included (VS1); Slightly Included 2 (VS2); Slightly Included 1 (IP1); Slightly Included 2 (SI2); Slightly including 3 (IP3) level is given by the GIA or AGS; Incomplete 1 (I1); Incomplete 2 (J2); Incomplete view 3 (I 3) How can you who are really abbreviations for grade class they represent. This makes it much easier to remember and understand a lot easier when you start talking with a diamond dealer. ; Types of inclusions; There are many types of inclusions were found in a diamond. Each record type can affect the diamond in various ways. The type and understand their impact on the stone will help you feel more comfortable if you have clarity of diamonds. ; Exact? A detect is a small crystal that forms in the diamond. Localized is tiny, and almost never seen with the naked eye. ; Pens? Spring is really a small cracks in the diamond. In most cases, are completely harmless. The diamond has not been broken or damaged, do not come in half-days rest a little worn. ; How much influence the pen for the diamond is very much on the placement of the source within the diamond, and the size of the source. Most countries are not large enough, a position which will affect the structural integrity of the diamonds are not. The best way to ensure the spring in a stone of your choice, be sure to mention your vender diamond. Additionally, you can use a stone from a credible, independent expert can judge you with a notice of recovery. ; Crystal; The crystal is just that – a small crystal in the largest crystal, which eventually formed on the diamond. The crystals can be white or black, which can be very visible or invisible, depending on the size, color and position. The crystals are not structural hazards in the diamond and is one of the most frequent entries. ; Needle; A needle is a type of crystal. When observed under the microscope, it resembles a small needle. Most of them are young, small, white inclusions, and should not be a concern. ; Clouds; Clouds groups of isolated and localized, as we know, are small crystals. So, in essence, groups of clouds of small crystals. A cloud is one of the best records you may have, it is very difficult to recognize. ; Many people believe that because the diamond has a cloud, it seems Sun In most cases this is simply not true. Even large clouds can virtually invisible, even under a magnifying 10 times. Given that many clouds are so low, transparent, allowing light to pass straight through them. It is almost always invisible to the eye and is a great way to get clarity on the victims, not any adverse effects on the diamond. ; Natural? A natural part of the diamond, not cut or polished. This occurs when the cutting of rough stones, cut the leaves a little rough and uncut. In untrained eye can be seen that the diamond is chipped, but a careful examination under a microscope to show something else. Common as it is near the middle. Naturals can also be indented. If this happens, I really like fleas, but also a closer examination under a microscope to show that he is. ; Node; A node is a crystal cut to reach the surface of the diamond after diamond. The websites are usually a raised area on the surface side of the diamond. ; Degradation; Diamond is a split right crack no wings. The division has the potential of the diamond side of the runway in Split, if the right corner. ; Cavity; An open cavity of the diamond. ; Chip; When a piece of the original diamond was chipped. ; Bearding; Bearding is when the hair-like lines that can occur around the girdle during the cutting. Low bearding is usually not a problem, but hem is often polished off or removed to cut diamonds. ; Internal graining: Surface graining? Graining is simply a characteristic structural defects in diamond. It is the visual structure of the diamond at the molecular level. Graining usually appears as lines in very small, visible only in diamond growth. There are a threat to the diamond, and indeed almost all the diamonds the size of some grains. ; Graining is one of the best records you can, because it is almost impossible to see with the naked eye. These additions are extremely low. It can be very difficult to find these defects in a 10x magnifying glass, let alone the naked eye. ; Services WISP cities? Wick corresponds essentially is an inconsistency in the shape of the molecules in the crystal. This leads to slight deviations in the Pearl, which can be seen under high magnification. ; Similar inconsistencies can be seen on ice, you are frozen by the observation that ice is not very clear, sometimes at length, but there are blank lines or turbidity in the mirror. These differences in the formation of ice crystals is the cause of this. It is diamond. ; Matching components are invisible in most cases it is a good host for diamonds less clear, because that is so weak, which makes it almost impossible to see with the naked eye. ; To create multiple diamonds clarity; Clarity enhanced diamonds are diamonds that have undergone any treatment to improve the apparent clarity of the stone. The two most popular methods to improve the clarity of the diamond are laser drilling and completing the diamond. ; In short, the diamond drilled with lasers. Sometimes the laser can then be used to burn or to facilitate integration. Once the registration is a cavity in the stone, the stone can be drilled, then the glass is a substance flowing through the host of the hole made. ; The clarity with the naked eye? It is important to remember when clearly that when the diamond is worn, the only tool for classification is used for clarity, the human eye. In general, most diamonds from reputable laboratories classified VS2 or better, will clean your eyes. There are many eye clean SI1 and SI2 and the stones are price to buy excellent. It may be hard to find but if you open a little clarity to sacrifice, you can get more for your money. ; For people who do not care about what can or can not see well, but what they know about diamonds, the highest levels of purity for you. When a diamond with little or wrong is not what you want, and keep the quality of the IF – VS2, whenever you want. Sometimes knowledge is more important than what we see, and this is a personal decision because of personal preferences. ; Remember that there is no good or bad decision. Whatever you decide, you will be the decision you have made happy. ; Carat weight? What is this?; Carat weight is simply the unit of measurement for determining the weight of precious stones. One carat equals one fifth of a gram. Diamonds are two hundredths of carat, or 1.25ct ie thousandths of carat weight, 1.254ct IE. How detailed is the weight as the laboratory has the diamond weight. ; How to display?; Although the carat weight, commonly called the size of the diamond, is misleading. The visual dimension of the actual diamond is much more dependent on the diameter of the diamond carat weight of the stone. It is not unusual to have two stones with the same weight, is very different in size to the naked eye. It is important to remember when buying a diamond. ; How will it affect prices?; Diamonds primary quantities determined by three factors, weight, color and clarity. ; For the weighting of the price of diamonds is a carat price basis. Thus, if the price per carat D 1 50CT Diamond is $ 1,000, the price of the diamond itself is $ 1500. ; The price per carat can achieve stones as weights different levels. In general, changes in the prices of diamonds, 50 ct, 70 ct, 90 ct, 1.00ct, 1.50ct, 2.00ct, 3.00ct, 4.00ct, etc.? For each of these steps may be the carat price change between 10% – 50%. These weights are sometimes referred to as the magic number that can buy a diamond just below the magic number to save money for customers. ; It works in theory, the reality is much more difficult than that. Diamonds are the magic number is rare and hard to find. That would be a diamond 1.99ct, and avoid trying to buy the price change of 2.00ct, it is almost impossible to find such a diamond, which is very well cut. ; They know where the magic number and how can it work in practice to come, it is the right stone. It can also indicate whether it could be a different aspect of the diamond a good idea, a magic number Diamonds, will save a lot of money can get. ; TOOLS AND TECHNOLOGY; Diamond scanners? As technology has advanced, computers have continued their way in our daily lives – the diamond industry is no exception. One of the most powerful tools that technology has brought the world of diamonds, the non-contact scanner. Non-contact scanners are devices that measure with cameras and lighting, combined with a powerful scanning and diamonds.? Is images or frame, between 3000 and 20,000 frames in the profile of the diamond and the diamond rotates in a scene. From these images, the software creates a virtual model of diamond with dimensions and proportions.? Moreover, some of these scanners and software from the user on the type of stone and can handle different lighting conditions and situations. The program offers a truly photorealistic view of the diamond occurs directly on the user’s computer. The technology is so expensive that buyers can buy diamonds real decisions entirely on models produced software for the analysis have never been the real diamond. ; The best part is that the introduction of technology, vendors are able to offer these models directly to you, like us here at Emma Parker & Co Here, you can create a very realistic idea of how the diamond you purchased stopped taking. ; The three most popular are the sarin Great Scope and sun-scanner. ; Reflectors; mirror technology has already affected the reduction of this tutorial. The reflectors are cut only. These devices show the user the ability to think of the diamond. There are several reflectors on the market, which are both the same, and about the same level of performance. The most common is the ideal-Scope, ASET and FireScope. ; The simple case of how technology works within the reflector in the cut of this tutorial. GIA Diamond Dock; The GIA Diamond Dock serves as a source of light, direct light combined with diffuse light to create an impression of real progress. It showed that from our experience, the exact replica of man is the day. ; The GIA Diamond Cut platform is based on the variety. The 70,000 observations were made to pass exactly the basis for cutting, performed under the illumination of the tank for Diamond. ; Wharf diamond is also useful for photography and color correction. The emphasis placed on the platform of diamonds to highlight the brilliance of the stone. There is an excellent view, cut like a stone in the real world. ; GEMEX Brilliance Scope? The GEMEX Brilliance Scope is a technology that diamonds were strong, direct light is assigned 5 different angles … Then take a picture with three presentations of the stone. The software then breaks classification of these images on a pixel-based measures and the amount of white light (Brilliance), Color Fire (light) and scintillation (the movement of light in diamond), issued by the diamond. The software then ranks the results based on a database with other diamonds, which are already digitized, and written notice of the diamond. ; The technology is certainly used in industry, but the results are not always a sign that the diamond will be translated into reality. In general, this applies to the stones, the low score, but still high luster and shine. A good score on the scope of Brilliance is generally very beautiful diamond.; Procurement process; The market process is a subject rarely spoken by jewelers until the customer is in high school. Here at Emma Parker & Co, the full disclosure of the client, only one piece of honesty is our first policy, and make the customer comfortable with the whole process is very important to us.? Diamond your choice? It notice as you browse the list of Emma Parker & Co website, our diamonds are divided into different categories. Each category offers the customer another my experiences.? Hearts & Arrows Ideal Cut Diamonds; Hearts & Arrows diamonds are only the tip of the cut about 57 strand diamond. These stones give amazing shine and luster, and this approach combines perfect symmetry of Hearts & Arrows. Emma Parker & Co pleased to provide the following information to our hearts and arrows diamonds at no cost to you. ; ON / certificate AGS; Sarin scan and model? Gem Adviser 3D model; Reflector image? Hearts and Arrows images? Photos Clarity? All Emma Parker & Co ’s Hearts & Arrows diamonds are trade throughout our lives-up, and 75% buy-back policy and return policy 30 our day. ; Ideal Cut AGS / GIA Excellent Cut private stock; Emma Parker & Co is proud to offer one of the largest private good inventory of GIA and AGS Ideal diamonds. A range of information and analysis is also easily accessible for diamonds. Emma Parker Co will be happy to provide the following information on the diamond at no cost to you. ; ON / certificate AGS; Sarin scan and model; Gem Adviser 3D model; Reflector image? Photos Clarity? These diamonds are also used by our dealings with life and all 75% buy-back policy, and may be included in the request for registration number. These diamonds are covered by 30 day return policy. ; Traditional round and fantasies; Emma Parker & Co is proud to offer a wide selection of stones around the traditional form of Collectors. We will be glad to give you a copy of the registration in a laboratory at no cost to you. ; If you want additional analysis, we consider also the following analysis, all we ask is that you have to cover shipping, diamonds in our laboratory. ; Sarin scan and model; Gem Adviser 3D model; Reflector image? Photos Clarity? If you buy a diamond to be absorbed to be purchased to reduce the cost of the diamond market price of the stone. These diamonds are covered by 10 policies for our return day. ; Choose Your Ring? Know that it is difficult to choose the right setting for a diamond than to find the right diamond. We have a selection of framed prints to choose from. Here at Emma Parker Co, we are also consumers, and for this reason, you can only find in our collection of settings that meet our standards of quality and beauty. In this way, you can choose with confidence. ; We are always happy to help you choose the right ring. Please let us know if you have any questions or ideas. Custom arrangements and non-refundable, so you can ask as many questions as you wish, you can be sure that you make the right decision. ; You have now completed our tutorial on the formation of diamonds, we hope you have a wonderful experience you have acquired through the purchase of diamonds, which are ideal
